Network Definitions

To work with Replication, you must define destination systems.

1. Select 71. Work with Network Definitions from the Base Support menu (STRxx > 89). The Work with Network Systems screen appears.

​ System type:​ AS400     ​  ​ Work with Network Systems​          ​ System:​ RLDEV   ​                                                 ​ Position to . . .​           ​     ​ Type options, press Enter.          ​                                              ​ 1=Select​ ​ 4=Remove​ ​ 7=Export dfn.​ ​ 8=Test DDM​ ​ 9=Ping​                                                                                                          ​ Opt​  ​ System​   ​ Group​                                                           ​ ​  ​   ​ RLDEMO  ​ ​ *TT     ​ Demo system Audit release 14.16                   ​      ​  ​   ​ RLDEV   ​ ​ *NONE   ​ Razlee Develop                                    ​      ​  ​   ​ RLG     ​ ​ *TT     ​ RL Germany                                        ​      ​  ​   ​ RLMED   ​ ​ *TT     ​ RLEMD                                             ​      ​  ​   ​ RLPRV   ​ ​ *TT     ​ Razlee Production                                 ​      ​  ​   ​ RL74A   ​ ​ *VVVV   ​ Demo system                                       ​      ​  ​   ​ RL74B   ​ ​ *NONE   ​ Test Yoel                                         ​      ​  ​   ​ VERDE   ​ ​ *NONE   ​ verde                                             ​                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             ​       Bottom​  ​ F3=Exit​   ​ F6=Add New​   ​ F7=Export dfn cmd​   ​ F12=Cancel​                        ​                                                                                                                                                                  ​

2. Press F6 to add a new system to the list or type 1 to modify an existing system. The Modify Network System screen appears.

​ System type:​ AS400     ​    ​ Modify Network System​            ​ System:​ S520    ​                                                                                   ​ System  . . . . . . . . . .​ ​ RAZLEE1 ​                                           ​ Description . . . . . . . .​ ​ RAZLEE1 machine                                    ​ Group where included  . . .​ ​ *RL     ​               ​ *Name         ​                                                                                              ​ Communication Details​                                                           ​ IP or remote name . . . . .​ ​ 251.236.56.124                                     ​                             ​                                                    ​                             ​                               ​                       ​ Type  . . . . . . . . . . .​ ​ *IP ​                   ​ *SNA, *IP​                  ​ Entry of *LOCAL on System .​ ​ C205307W          ​     ​ Use WRKRDBDIRE to verify​   ​ Auto filled for this system. Required for Multi-LPAR of AOD, P-R, Replication.​                                                                                   ​ Copy of QAUDJRN on a different system​                                           ​ Where is QAUDJRN analyzed .​ ​ *SYSTEM ​               ​ Name, *SYSTEM​              ​ Extension Id on remote  . .​ ​ D  ​                                                                                                                                                                                                                                                                                                   ​ Note: After adding a system, run again "Network Authentication".              ​  ​                                                                                 ​ F3=Exit​  ​ F12=Cancel​                                                            ​                                                                             ​  ​  ​

Parameters	Description
System	The name of the system you are defining.
Description	Enter a meaningful description.
Group where included	You can create groups of system. The group name must begin with an asterisk (*).
Type	*SNA or *IP
IP or remote name	If type = *SNA, enter the name of the remote system. If Type = *IP, enter the IP address of the remote system.

3. Type the appropriate parameters and press Enter.

NOTE: When you define both source and target systems, you must define each system on both the systems. Both systems must have the same version of Base Support installed.